Animal Feed & Nutrition Division of the Green Agrochem groupTDS · SDS downloadsinfo@greenagrochem.com
Home » Magnesium Lignosulfonate Animal Feed Grade

Magnesium Lignosulfonate Animal Feed Grade

Magnesium Lignosulfonate Animal Feed Grade

Magnesium Lignosulfonate Animal Feed Grade is a lignin-derived technological ingredient supplied primarily for evaluation as a feed pellet binder and processing aid. The magnesium counter-ion forms part of the product identity, but the product should not be presented as a treatment, disease-prevention product or assured nutritional-performance enhancer. Intended use must follow the actual grade, formula and destination-market requirements.

Product identification

Product nameMagnesium Lignosulfonate Animal Feed Grade
Product codeGAC-MgLS-Feed
CAS No.8061-54-9
Physical formLight brown to dark brown powder
Primary technological roleFeed pellet binder and processing aid

TDS-aligned physical and chemical specifications

ParameterSpecification
AppearanceLight brown to dark brown powder
OdorMild woody / neutral
Lignosulfonate content55% min, dry basis
Moisture content5.0% max
Ash content15.0%–20.0%
pH4.5–6.5, 10% aqueous solution
Water-insoluble matter1.0% max
Sulfate content2% max

The current TDS, agreed commercial specification and shipment COA prevail over this webpage.

Heavy-metal and microbiological limits

ParameterSpecificationPurchase control
Lead (Pb)10 mg/kg maxConfirm the applicable limits, methods and batch results for the intended species and destination market.
Arsenic (As)3 mg/kg max
Cadmium (Cd)1 mg/kg max
Total plate count1,000 CFU/g max
Yeast & mold100 CFU/g max
SalmonellaNegative in 25 g

Recommended application scope

  • Feed pelleting: candidate binder for improving physical cohesion after controlled mill validation.
  • Fines management: evaluate breakage and dust at defined points after cooling and handling.
  • Powder processing: assess flow, mixing uniformity and compatibility with the complete formula.
  • Species-specific feed: confirm grade suitability, intended technological function and local requirements before use.

No claim is made here that the product improves immunity, growth, digestibility, mineral absorption or disease prevention. Any nutritional declaration would require product-specific composition, regulatory status and appropriate supporting evidence.

Regulatory reference points

SourceWhat it saysPractical meaning
EFSA FEEDAP Panel (2015), EFSA Journal 13(7):4160, doi:10.2903/j.efsa.2015.4160Calcium, sodium and magnesium lignosulphonate assessed together: safe up to 10,000 mg/kg complete feed for chickens for fattening, laying hens, pigs for fattening and cattle for fattening; effective as a pellet binder from 7,500 mg/kg; no margin of safety identified, so not extended to other speciesSuperseded in the EU by Regulation (EU) 2024/749: 10,000 mg/kg for five named categories, 8,000 mg/kg for all other species
US 21 CFR §573.600 Lignin sulfonates (LII)Ammonium, calcium, magnesium or sodium salts of spent sulfite liquor extract may be used in animal feed, calculated on a dry-weight basis: as a pelleting aid up to 4% of finished pellets; as a binding aid in flaking feed grains up to 4%; as a surfactant in molasses up to 11% of the molasses; as a source of metabolizable energy up to 4% of finished feed. Dry form moisture must not exceed 6%; liquid form moisture must not exceed 50%US limits are maxima for those uses, not recommended dosages

Requirements differ by market. Confirm the authorization, labelling and conditions of use that apply at the destination.

Recommended starting trial guidance

In the EU, Regulation (EU) 2024/749 sets the maximum content of lignosulphonate (1g565) at 10,000 mg/kg (1.0%) of complete feed for weaned piglets, pigs for fattening, chickens for fattening, laying hens and cattle for fattening, and 8,000 mg/kg (0.8%) for all other species. EFSA found the additive effective as a pellet binder from 7,500 mg/kg. Within those limits, set the inclusion rate with a mill trial on the exact supplied grade; formulation and regulatory review must precede commercial use.

  1. Define the target: PDI, fines reduction, handling stability or processing consistency.
  2. Record the control formula, mineral profile, baseline PDI, fines, moisture, throughput and die load.
  3. Confirm the actual lot specification, feeder calibration and proposed starting level.
  4. Keep raw materials, conditioning, die settings and sampling points as consistent as practical.
  5. Measure results after cooling and after a repeatable handling simulation.
  6. Review the magnesium and other analytical contributions using the actual product specification.
  7. Repeat the preferred result before approving the commercial level and purchase specification.

How to compare magnesium, calcium and sodium grades

QuestionRecommended review
Does the formula have a mineral constraint?Calculate the actual contribution of the offered grade at the proposed level.
Is pellet durability the main target?Compare candidates using the same PDI, fines and production protocol.
Does the mill use dry or liquid dosing?Select a compatible physical form and verify feeder or pump accuracy.
Are documents required for approval?Review TDS, SDS, agreed specification, batch COA, traceability and market requirements.
Is price being compared?Include active material, required addition, production response, transport and documentation—not only price per tonne.

Statements seen elsewhere and their status

StatementStatus
“Recognized as safe by FDA under 21 CFR 172.715 for animal feed”Incorrect citation: 21 CFR 172.715 covers calcium lignosulfonate as a dispersant and stabilizer in pesticides for bananas. The animal-feed provision is 21 CFR 573.600
“Typically 0.5–2% of feed”No source; the current TDS gives up to 0.8% of complete feed (1.0% for five EU-named categories)
Improves mineral bioavailability, immunity, growth or digestionNo product-specific evidence; not claimed
“LD50 >5,000 mg/kg”No study identified for this grade; use the current SDS
Suitable for all species including aquaculture and pet foodThe EU authorisation (1g565) sets 8,000 mg/kg for most species and 10,000 mg/kg for five named categories; check each market before pet food or aquafeed use

Packaging, storage and handling

Standard options in the current TDS include 25 kg woven or kraft bags and lined jumbo bags, subject to quotation. Store tightly sealed in a cool, dry and ventilated area, protected from moisture and incompatible materials. Apply dust control and the personal-protection measures in the current SDS. Confirm the applicable shelf life, manufacturing date and storage conditions on the supplied documents.

Technical documents

Related selection resources

Frequently asked questions

Is this page claiming a nutritional or health benefit?

No. The page positions the product primarily as a technological pellet binder and processing aid. Nutritional or animal-health claims require separate substantiation and applicable authorization.

Is there a fixed dosage?

No. In the EU the legal maximum is 10,000 mg/kg (1.0%) of complete feed for the five listed categories and 8,000 mg/kg (0.8%) for other species under Regulation (EU) 2024/749. The working rate within that limit depends on the exact grade, complete formula, species, measured mill results and local requirements.

Can an industrial magnesium lignosulfonate grade be substituted?

Do not assume interchangeability. Review the intended feed grade, contaminant and microbiological limits, documentation and traceability.

Request documents, sample or trial support

Send the species, feed type, formula constraints, current pellet-quality data, trial quantity, monthly demand, destination, packaging and required documents to info@greenagrochem.com. LIGNINCHINA can recommend an evaluation plan; final suitability remains subject to customer validation.

Inclusion Levels

Inclusion (mg/kg feed)Per tonne of feedContext
7,5007.5 kgEFSA (2015) effective level, cited in the TDS
8,0008.0 kgEU maximum, most species
10,00010.0 kgEU maximum, five named categories

Frequently Asked Questions

What is the specification of magnesium lignosulfonate feed grade?

Lignosulphonate 55% min (dry basis), moisture 5% max, ash 15 – 20%, pH 4.5 – 6.5, insolubles 1.0% max, with limits for lead, arsenic, cadmium and microbes (TDS Rev. 1.0).

What is the maximum inclusion in the EU?

10,000 mg/kg complete feed for five named categories and 8,000 mg/kg for other species (Regulation 2024/749).

Is a TDS available?

Yes, the Feed Grade TDS and SDS are available; a COA comes with each batch.